Adhesive base, 4.2 mm, (for Cone Connection)
Properties
- adhesive connection with zirconium dioxide frameworks
- individual hybrid abutment the IMPLA conical connection range
Description
Abutment for adhesive connection with zirconium dioxide frameworks or as an individual hybrid abutment the IMPLA conical connection range.
Product number:
638601
Questions about the product? We are glad to be here for you!
Product information "Adhesive base, 4.2 mm, (for Cone Connection)"
Using this titanium base (titanium grade 5), you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.
Brochures and further information on this product
Cutsomers also bought
Adhesive base, 5.3 mm, (for Cone Connection)
Using this titanium base (titanium grade 5), you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.
Adhesive base, 3.3 mm, (for Cone Connection)
Using this titanium base (titanium grade 5), you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.
Adhesive base D 4.2 mm,
Use this titanium base (titanium grade 5) to glue both individual crowns and bridge constructions made from ZrO2. We recommend the use of Sebond Implant and Alphalink Implant for this procedure.
Adhesive base D 4.2 mm,
Use this titanium base (titanium grade 5) to glue both individual crowns and bridge constructions made from ZrO2. We recommend the use of Sebond Implant and Alphalink Implant for this procedure.
Transfer cap for Mini implant conetop,
By attaching the acrylic cap this locks on cleanly to the impression post or directly onto the connection on the Mini-conetop implant. After a successful impression, the transfer cap remains in the impression and helps fix the corresponding laboratory analogue. The acrylic transfer cap is not suitable for use more than once!
Vertical screw standard, Vertical screw for Impla Direkt GH 1.5 mm
Has a fine thread, which meshes perfectly with the inner thread of the implant, cold welded. This make it practically impossible for the abutment to become loose.