Conical connector 3.3 mm / 1 mm / 0°, Cone Connection incl. screw
Variante:
Konuskonnektor 3,3 mm / 1 mm / 0°
Set: The screw is included. This abutment made of titanium grade 5 with a conical implant connection geometry and a prefabricated emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 5.3 mm / 1 mm / 0°, Cone Connection incl. screw
Variante:
Konuskonnektor 5,3 mm / 1 mm / 0°
Set: The screw is included. This abutment made of titanium grade 5 with a conical implant connection geometry and a prefabricated emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 5.3 mm Cone Connection
Variante:
15°/1 mm
This abutment made of titanium grade 5 with its conical implant connection geometry and its tailor-made emergence profile was specially developed for the IMPLA Cone Connection line. Supra constructions can be either cemented or adhesion-fixed.Available with gingiva heights of 1 mm, 3 mm or 5 mm and with angles of 0°, 15° or 20°.
Conical connector 3.3 mm Cone Connection
Variante:
15° / 1 mm
This abutment made of titanium grade 5 with conical implant connection geometry and ready-made emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 4.2 mm Cone Connection
Variante:
15°/1 mm
This abutment made of titanium grade 5 with its conical implant connection geometry and its tailor-made emergence profile was specially developed for the IMPLA Cone Connection line. Supra constructions can be either cemented or adhesion-fixed. Available with gingiva heights of 1 mm, 3 mm or 5 mm and with angles of 0°, 15° or 20°.
Conical connector 4.2 mm / 1 mm / 0°, Cone Connection incl. screw
Variante:
Konuskonnektor 4,2 mm / 1 mm / 0°
Set: The screw is included. This abutment made of titanium grade 5 with a conical implant connection geometry and a prefabricated emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 3.3 mm individ. millable, Cone Connection incl. screw
Variante:
Konuskonnektor 3,3 mm ind. fräsbar
Set: The screw is included. This abutment made of titanium grade 5 is individually adapted by the lab in case that implants of the IMPLA Cone Connection series show a strong angulation.
Conical connector individually millable Hex connection incl. vertical screw
Variante:
3,3 mm
This abutment made of titanium grade 5 is individually adjusted at the lab to strong divergences in IMPLA Hex Connection implants.
Conical connector 3.3/0° GH=1, (for Cone Connection)
Variante:
3,3 mm / 1 mm
This abutment made of titanium grade 5 with conical implant connection geometry and ready-made emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 3.3 mm individ. millable, (for Cone Connection)
Variante:
3,3 mm
This grade 5 titanium abutment is adapted individually in the lab where angulation of greater than 15° is required with the IMPLA Cone Connection system.
Adhesive base 3.3 mm, Cone Connection incl. screw
Variante:
Klebebasis 3,3 mm
This is a set: The screw is already included!This titanium base is suited to an adhesive fixation of individual crowns as well as of bridgeworks made from ZrO2. We recommend the use of Sebond Implant and Alphalink Implant. Using this titanium base, you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.
PreFace Abutment (for Cone Connection)
Variante:
5,3 mm / D = 11,5 mm
Our PreFace®-Abutments facilitate the use of PreFace®-Abutment Holders by Medentika. The PreFace®-Abutments are available in the diameters 11.5 mm and 16 mm and with the connection geometries Hex Connection and Cone Connection. This offers the user the necessary variability. The abutments are made of titanium grade 5 which makes them easy and safe to handle. Titanium grade 5 is also highly biocompatible.Your benefits:With PreFace Abutments® you will achieve a superior added value by flexibility – Use our PreFace®-Abutments together with the PreFace®-Abutment Holders by Medentika. saving time – Two different blank diameters guarantee significantly shorter working times in production. exact definition of the zero position – The uniform length despite the different diameters lets you define the zero position almost exactly. variability – The two different diameters 11.5 mm and 16 mm facilitate flexible work. precision – The preset production processes as well as the standard production processes provide for even more precise results. Material: Titanium grade 5
PreFace Abutment (for Cone Connection)
Variante:
5,3 mm / D = 16 mm
Our PreFace®-Abutments facilitate the use of PreFace®-Abutment Holders by Medentika. The PreFace®-Abutments are available in the diameters 11.5 mm and 16 mm and with the connection geometries Hex Connection and Cone Connection. This offers the user the necessary variability. The abutments are made of titanium grade 5 which makes them easy and safe to handle. Titanium grade 5 is also highly biocompatible.Your benefits:With PreFace Abutments® you will achieve a superior added value by flexibility – Use our PreFace®-Abutments together with the PreFace®-Abutment Holders by Medentika. saving time – Two different blank diameters guarantee significantly shorter working times in production. exact definition of the zero position – The uniform length despite the different diameters lets you define the zero position almost exactly. variability – The two different diameters 11.5 mm and 16 mm facilitate flexible work. precision – The preset production processes as well as the standard production processes provide for even more precise results. Material: Titanium grade 5
Adhesive base, 3.3 mm, (for Cone Connection)
Variante:
3,3 mm
Using this titanium base (titanium grade 5), you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.
Acrylic abutment 4.2 mm, Conical Hybrid Connection,
Variante:
4,2 mm
Model and cast individual abutments with this burn out material which leaves virtually no trace. This acrylic abutment combines well with the modelling waxes and acrylics used in most dental labs. This gives clean casting results and a good fit for all your technical dental work. Thanks to precisely manufactured hexagonal connection of the acrylic structure, you have a high degree of rotation protection. Indications: Bar restorations Individual crowns Bridges Temporary abutment
Scanabutment 3,3 mm Conical Hybrid Connection
Variante:
3,3 mm
Abutment for digital scanning of model situations on the master model. For IMPLA Cone Connection. This PEEK abutment is especially well-suited for digital measurement with optical scanners or laser scanners, due to its bowling pin shape. The Best Fit-Function of the construction software is supported by an additional flattened surface. The scan abutment does not need to be prepared with scan spray due to its whitish matt color. Your benefits: Extraordinary digital measurement due to the bowling pin shape No preparation with scan spray necessary Easy recognition of the size with help of laser markings Made in Germany
Vertical screw standard, Vertical screw for Impla Direkt GH 1.5 mm
Has a fine thread, which meshes perfectly with the inner thread of the implant, cold welded. This make it practically impossible for the abutment to become loose.
vertical screw blue,
Comes with the implant and helps repeated use when making prostheses in the laboratory. Item no 636649 is strongly recommended as the final connection screw.
Vertical screw POM,
This vertical screw made of POM facilitates an optimal adhesion at the connection between adhesive base and CAD/CAM element. The perfect fit of the plastic screw reliably prevents adhesive residue from entering the screw channel.