Universal drill 0,6 mm for wax, PMMA, zirconia, composites, Length 40 mm for Tizian Cut 5 smart
Description
For finishing blanks made from wax, PMMA, zirconium dioxide and composite
Product number:
523707
Questions about the product? We are glad to be here for you!
Product information "Universal drill 0,6 mm for wax, PMMA, zirconia, composites, Length 40 mm for Tizian Cut 5 smart"
Universal mill with a length of 40 mm for your Tizian Cut 5 smart. For finishing blanks made from wax, PMMA, zirconium dioxide and composite.
Cutsomers also bought
Calibration blank 98 x 10 mm, for Tizian Cut 5 smart / Cut 5 smart Plus
Use these blanks made of polyurethane foam to carry out test millings in the process of calibrating or re-measuring your Tizian Cut 5 Smart or Tizian Cut 5 Smart Plus. Produce special test copings to measure subsequently. Enter this data into the control system of milling machine.
Single-toothed drill 2.5mm for wax + acrylic, Tizian Cut 5 Smart
Flat mill, single-edged, edge Ø 2.5 mm, shaft Ø 3 mm, total length 40 mm. The flat mill has an angle of 90°. Processing type: roughing Blank material: PMMA, wax, PEEK Type: uncoated Coding color: silver For the milling machines: Tizian Cut 5 smart, Tizian Cut 5 smart plus
T11 Tizian Cut 5/3.5 PMMA finemilling single point mill, 2,5 mm, 6 mm shaft
Radius cutter single-edged, edge Ø 2.5 mm, shaft Ø 6 mm, total length 53 mm, max. blank height = 25 mm. Processing type: pilot milling Blank material: PMMA, PEEK Coating type: uncoated Ring color: gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
T12 Tizian Cut 5/3.5 PMMA finemilling single point mill, 1,0mm, 6 mm shaft
Radius cutter single-edged, edge Ø 1 mm, shaft Ø 6 mm, total length 53 mm, max. blank height = 25 mm. Processing type: fine finishing Blank material: PMMA, PEEK Coating type: uncoated Ring color: gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
Tizian Blank NEM fine 98 mm
Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%
Radius cutter, 2.0 mm, 1-cutter, polycarbonate/PMMA/wax/PEEK, Tizian Cut 5 smart
Radius cutter one-edged, edge Ø 2 mm, shaft Ø 3 mm, total length 40 mm Processing type: pilot drilling Blank material: PMMA, wax, PEEK, Polycarbonate Coating type: uncoated Ring color: black For milling machines: Tizian Cut 5 smart, Tizian Cut 5 smart plus