Drill coated 2 mm for wax + acrylic, Tizian Cut 5 Smart
Description
Radius cutter for your Tizian milling system
Product number:
523676
Questions about the product? We are glad to be here for you!
Product information "Drill coated 2 mm for wax + acrylic, Tizian Cut 5 Smart"
Radius cutter, double-edged, edge Ø 2 mm, shaft Ø 3 mm, total length 40 mm
- Processing type: roughing
- Blank material: PMMA, wax, PEEK
- Type: uncoated
- Coding color: silver
- For the milling machines: Tizian Cut 5 smart, Tizian Cut 5 smart plus
| Beschichtung: | Unbeschichtet |
|---|---|
| Maschinentyp: | Tizian Cut 5 Smart Pro Plus, Tizian Cut 5 dry Serie, Tizian Cut 5 smart Serie |
| Werkstoff: | PEEK, PMMA, Wachs |
Brochures and further information on this product
Cutsomers also bought
Single-toothed drill 2.5mm for wax + acrylic, Tizian Cut 5 Smart
Flat mill, single-edged, edge Ø 2.5 mm, shaft Ø 3 mm, total length 40 mm. The flat mill has an angle of 90°. Processing type: roughing Blank material: PMMA, wax, PEEK Type: uncoated Coding color: silver For the milling machines: Tizian Cut 5 smart, Tizian Cut 5 smart plus
Drill 1 mm for wax + acrylic , Tizian Cut 5 Smart
Radius cutter, double-edged, edge Ø 1 mm, shaft Ø 3 mm, total length 40 mm Processing type: fine finishing Blank material: PMMA, wax, PEEK Type: uncoated Coding color: silver For the milling machines: Tizian Cut 5 smart, Tizian Cut 5 smart plus
FuturaGen liquid, 1000 ml,
The right prosthesis acrylic - when ""Good Enough"" just isn´t good enough. FuturaGen is the cold-curing acrylic with outstanding physical properties which sets new standards. Benefits: Very high stability, making it also suitable for occlusal splints Extremely flat surface, reduces plaque accumulation Ideal for individualization, for example with Futura Intensiv paints, the PCS system and separate veins Very good fit due to low shrinkage: Also perfect for implant work "
FuturaGen powder, pink 1000g, pink, 1000 g
The right prosthesis acrylic - when ""Good enough"" just isn´t good enough. FuturaGen is the cold-curing polymer with outstanding physical properties which sets new standards. Your benefits: Very wide range of colors Minimal residual monomer content Very high stability, making it also suitable for occlusal splints Extremely flat surface, reduces plaque accumulation Ideal for individualization, for example with Futura Intensiv paints and separate veins Very good fit due to low shrinkage: Also perfect for implant work
T3/T8 Tizian Cut 5/3.5 ball-headed metal drill 1,5, CoCr/Ti balltop
Ball-end mill, double-edged, edge Ø 1.5 mm, shaft Ø 6 mm, total length 48 mm Processing type: drilling a screw channel Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 650i
T61 Tizian Cut 5/3.5 radius cutter 3.0 mm for Titan/CoCr, 4-bladed, 6 mm shaft
T61 - metal roughing tool The complex geometry of the four high-capacity cutting edges (this is not a radius cutter!) facilitate a smooth operation, a much better service life and time savings of up to 50 % during the roughing procedure. Metal restorations are manufactured within ca. 10-15 min. in extraordinary quality. Please note that the special cutter geometry requires a new strategy and new tool data in the CAM software. This tool does not replace the reliable T6! Diameter Ø 3.0 mm Cutting edges quadruple edge Shaft Ø 6 mm Cutting length: l = 15 mm Total length: 45 mm Max. blank height: 15 mm Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian Cut 5.2 Series, Tizian Cut 5, CORiTEC 550i, CORiTEC 650i