Alphalink Implant, 2 x 4g cartridge incl. mixing cannula

Alphalink bonding adhesive is a two-part composite. For gap-free joints, for example between secondary crowns and tertiary frameworks directly in the mouth or on a technical dental model. ,The two components are filled into one double chamber syringe each. When extruded, they mix homogeneously in the ideal consistency in the mixing tube.

The right prosthesis acrylic - when ""Good enough"" just isn´t good enough. FuturaGen is the cold-curing polymer with outstanding physical properties which sets new standards.   Your benefits: Very wide range of colors Minimal residual monomer content Very high stability, making it also suitable for occlusal splints Extremely flat surface, reduces plaque accumulation Ideal for individualization, for example with Futura Intensiv paints and separate veins Very good fit due to low shrinkage: Also perfect for implant work  

The right prosthesis acrylic - when ""Good Enough"" just isn´t good enough. FuturaGen is the cold-curing acrylic with outstanding physical properties which sets new standards.   Benefits: Very high stability, making it also suitable for occlusal splints Extremely flat surface, reduces plaque accumulation Ideal for individualization, for example with Futura Intensiv paints, the PCS system and separate veins Very good fit due to low shrinkage: Also perfect for implant work "

There is a new zirconium dioxide for everyone!priti®multidisc ZrO? multicolor Extra Translucent with a translucence of 45 % and flexural strength >, 1,150 MPa. A cleverly devised zirconium dioxide concept which is an outstanding choice for almost every user. It makes working matchlessly easy. Beautiful &, strong! Real aesthetics - one fits all! Indications: priti®multidisc ZrO? Extra Translucent are excellently suited to the production of monolithic fully anatomic and partially or fully veneered crowns and bridges with up to 16 units individual abutments for anterior and side teeth on abutment teeth and implants What makes this product so special is its well-balanced relationship between high transparency and flexural strength. This indicates it for an especially wide range of indications.Material: Zirconium dioxide type II, class 5 according to DIN EN ISO 6872 Flexural strength >, 1,150 MPa Exceptional transparency of 45 % Thin wall thickness in the anterior tooth range of 0.4 mm and in the side tooth range of 0.6 mm for individual crowns Precise margins and edges because of a highly condensed material Can be veneered with close to every commercially available ceramic material which is adjusted to the CTE 10 · 10-6 K-1 of ZrO? Batch-independent color accuracy Homogeneous colorization Reproducible colors Biocompatible

Diamond radius face cutter, edge Ø 1 mm, shaft Ø 6 mm, total length 40 mm Processing type: fine finishing Blank material: glass ceramics, lithium disilicate, feldspath ceramics Type: diamond polished Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i

Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%