priti®multidisc ZrO2 multicolor Extra Translucent, 98 x 20, Color B light

There is a new zirconium dioxide for everyone!priti®multidisc ZrO? multicolor Extra Translucent with a translucence of 45 % and flexural strength >, 1,150 MPa. A cleverly devised zirconium dioxide concept which is an outstanding choice for almost every user. It makes working matchlessly easy. Beautiful &, strong! Real aesthetics - one fits all! Indications: priti®multidisc ZrO? Extra Translucent are excellently suited to the production of monolithic fully anatomic and partially or fully veneered crowns and bridges with up to 16 units individual abutments for anterior and side teeth on abutment teeth and implants What makes this product so special is its well-balanced relationship between high transparency and flexural strength. This indicates it for an especially wide range of indications.Material: Zirconium dioxide type II, class 5 according to DIN EN ISO 6872 Flexural strength >, 1,150 MPa Exceptional transparency of 45 % Thin wall thickness in the anterior tooth range of 0.4 mm and in the side tooth range of 0.6 mm for individual crowns Precise margins and edges because of a highly condensed material Can be veneered with close to every commercially available ceramic material which is adjusted to the CTE 10 · 10-6 K-1 of ZrO? Batch-independent color accuracy Homogeneous colorization Reproducible colors Biocompatible

With a translucency of 35 %.Indications:   Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, frameworks     Recommended for covering discolored tooth stumps or metal structures Advantages of monochromatic precolored blanks Why use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material:   Zirconium type II, class 5 according to DIN EN ISO 6872   Good flexural strength of >, 1,150 MPa   Very high translucency of 35 % Good aging resistance Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm   Biocompatible    

With a translucency of 35 %.Indications:   Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, frameworks     Recommended for covering discolored tooth stumps or metal structures Advantages of monochromatic precolored blanks Why use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material:   Zirconium type II, class 5 according to DIN EN ISO 6872   Good flexural strength of >, 1,150 MPa   Very high translucency of 35 % Good aging resistance Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm   Biocompatible    

Milled blanks made from polyether ether ketone (PEEK) are ideally suited to the manufacture of removable replacement teeth. With suitable surface conditioning, PEEK can be dressed with common veneer composites. Benefits for you: Good gliding properties, so an ideal replacement for Galvanic electroplating High plaque resistance High elasticity at low E modulus MMA and benzoyl peroxide free Break resistant and highly resistant to chemicals X ray opaque Can be sterilised

There is a new zirconium dioxide for everyone!priti®multidisc ZrO? multicolor Extra Translucent with a translucence of 45 % and flexural strength >, 1,150 MPa. A cleverly devised zirconium dioxide concept which is an outstanding choice for almost every user. It makes working matchlessly easy. Beautiful &, strong! Real aesthetics - one fits all! Indications: priti®multidisc ZrO? Extra Translucent are excellently suited to the production of monolithic fully anatomic and partially or fully veneered crowns and bridges with up to 16 units individual abutments for anterior and side teeth on abutment teeth and implants What makes this product so special is its well-balanced relationship between high transparency and flexural strength. This indicates it for an especially wide range of indications.Material: Zirconium dioxide type II, class 5 according to DIN EN ISO 6872 Flexural strength >, 1,150 MPa Exceptional transparency of 45 % Thin wall thickness in the anterior tooth range of 0.4 mm and in the side tooth range of 0.6 mm for individual crowns Precise margins and edges because of a highly condensed material Can be veneered with close to every commercially available ceramic material which is adjusted to the CTE 10 · 10-6 K-1 of ZrO? Batch-independent color accuracy Homogeneous colorization Reproducible colors Biocompatible

Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%