Multi Unit Abutment 30° Hex Connection incl. screws
Variante:
Ø 3,3 mm / GH 1 mm
The IMPLA Multi Unit system has been specially developed for occlusally screw-retained permanent and removable bars, bridges, and total restorations. IMPLA Multi Unit abutments are available in three different angles (0°, 20°, and 30°). The abutments are directly joined with the respective implant via screw connection. This creates a fixed transgingival platform that can be used for all further prosthetic and laboratory measures. The 0° abutments have a pre-fitted screw thread and are screwed into the implant with the long or short insertion key. The vertical Multi Unit screw is used to attach the 20° and 30° abutments to the implant. This screw is screwed in using the long or short 1.2 mm screwdriver. All laboratory components are secondarily secured to the abutment base with the prosthetics screw using the long or short 1.2 mm screwdriver. For the range of recommended implants, please see the IMPLA instructions for use. The IMPLA Multi-Unit Abutment Concept facilitates improved usage of the available bone structure. By means of an angulated insertion of the terminal implants, the available bone is used in distal direction which improves the stability. With the according angulation, the Multi-Unit Abutments ensure a uniform insertion direction of the prosthetics to facilitate a tension-free screw fixation. For this purpose, the IMPLA Multi-Unit Abutment Concept contains straight and angulated components. The minimal number of implants for a complete reconstruction is four in the mandible and six in the maxilla. (please see the IMPLA instructions for use)
Multi Unit Abutment 20° Hex Connection incl. screws
Variante:
Ø 3,3 mm / GH 1,5 mm
The IMPLA Multi Unit system has been specially developed for occlusally screw-retained permanent and removable bars, bridges, and total restorations. IMPLA Multi Unit abutments are available in three different angles (0°, 20°, and 30°). The abutments are directly joined with the respective implant via screw connection. This creates a fixed transgingival platform that can be used for all further prosthetic and laboratory measures. The 0° abutments have a pre-fitted screw thread and are screwed into the implant with the long or short insertion key. The vertical Multi Unit screw is used to attach the 20° and 30° abutments to the implant. This screw is screwed in using the long or short 1.2 mm screwdriver. All laboratory components are secondarily secured to the abutment base with the prosthetics screw using the long or short 1.2 mm screwdriver. For the range of recommended implants, please see the IMPLA instructions for use. The IMPLA Multi-Unit Abutment Concept facilitates improved usage of the available bone structure. By means of an angulated insertion of the terminal implants, the available bone is used in distal direction which improves the stability. With the according angulation, the Multi-Unit Abutments ensure a uniform insertion direction of the prosthetics to facilitate a tension-free screw fixation. For this purpose, the IMPLA Multi-Unit Abutment Concept contains straight and angulated components. The minimal number of implants for a complete reconstruction is four in the mandible and six in the maxilla. (please see the IMPLA instructions for use)
Multi Unit Abutment 30° Hex Connection
Variante:
Ø 3,3 mm / GH 1 mm
The IMPLA Multi Unit system has been specially developed for occlusally screw-retained permanent and removable bars, bridges, and total restorations. IMPLA Multi Unit abutments are available in three different angles (0°, 20°, and 30°). The abutments are directly joined with the respective implant via screw connection. This creates a fixed transgingival platform that can be used for all further prosthetic and laboratory measures. The 0° abutments have a pre-fitted screw thread and are screwed into the implant with the long or short insertion key. The vertical Multi Unit screw is used to attach the 20° and 30° abutments to the implant. This screw is screwed in using the long or short 1.2 mm screwdriver. All laboratory components are secondarily secured to the abutment base with the prosthetics screw using the long or short 1.2 mm screwdriver. For the range of recommended implants, please see the IMPLA instructions for use. The IMPLA Multi-Unit Abutment Concept facilitates improved usage of the available bone structure. By means of an angulated insertion of the terminal implants, the available bone is used in distal direction which improves the stability. With the according angulation, the Multi-Unit Abutments ensure a uniform insertion direction of the prosthetics to facilitate a tension-free screw fixation. For this purpose, the IMPLA Multi-Unit Abutment Concept contains straight and angulated components. The minimal number of implants for a complete reconstruction is four in the mandible and six in the maxilla. (please see the IMPLA instructions for use)
Multi Unit Abutment 20° Hex Connection
Variante:
Ø 3,3 mm / GH 1,5 mm
The IMPLA Multi Unit system has been specially developed for occlusally screw-retained permanent and removable bars, bridges, and total restorations. IMPLA Multi Unit abutments are available in three different angles (0°, 20°, and 30°). The abutments are directly joined with the respective implant via screw connection. This creates a fixed transgingival platform that can be used for all further prosthetic and laboratory measures. The 0° abutments have a pre-fitted screw thread and are screwed into the implant with the long or short insertion key. The vertical Multi Unit screw is used to attach the 20° and 30° abutments to the implant. This screw is screwed in using the long or short 1.2 mm screwdriver. All laboratory components are secondarily secured to the abutment base with the prosthetics screw using the long or short 1.2 mm screwdriver. For the range of recommended implants, please see the IMPLA instructions for use. The IMPLA Multi-Unit Abutment Concept facilitates improved usage of the available bone structure. By means of an angulated insertion of the terminal implants, the available bone is used in distal direction which improves the stability. With the according angulation, the Multi-Unit Abutments ensure a uniform insertion direction of the prosthetics to facilitate a tension-free screw fixation. For this purpose, the IMPLA Multi-Unit Abutment Concept contains straight and angulated components. The minimal number of implants for a complete reconstruction is four in the mandible and six in the maxilla. (please see the IMPLA instructions for use)
Multi Unit Abutment 0° Hex Connection
Variante:
Ø 3,3 mm / GH 1 mm
The IMPLA Multi Unit system has been specially developed for occlusally screw-retained permanent and removable bars, bridges, and total restorations. IMPLA Multi Unit abutments are available in three different angles (0°, 20°, and 30°). The abutments are directly joined with the respective implant via screw connection. This creates a fixed transgingival platform that can be used for all further prosthetic and laboratory measures. The 0° abutments have a pre-fitted screw thread and are screwed into the implant with the long or short insertion key. The vertical Multi Unit screw is used to attach the 20° and 30° abutments to the implant. This screw is screwed in using the long or short 1.2 mm screwdriver. All laboratory components are secondarily secured to the abutment base with the prosthetics screw using the long or short 1.2 mm screwdriver. For the range of recommended implants, please see the IMPLA instructions for use. The IMPLA Multi-Unit Abutment Concept facilitates improved usage of the available bone structure. By means of an angulated insertion of the terminal implants, the available bone is used in distal direction which improves the stability. With the according angulation, the Multi-Unit Abutments ensure a uniform insertion direction of the prosthetics to facilitate a tension-free screw fixation. For this purpose, the IMPLA Multi-Unit Abutment Concept contains straight and angulated components. The minimal number of implants for a complete reconstruction is four in the mandible and six in the maxilla. (please see the IMPLA instructions for use)
Impression post Multi Unit,
An impression aid for impressions of Multi Unit abutments on abutment level. Fix the impression aid on the Multi Unit abutments with help of the fixation screw OL.
bar screw,
Connection screw for constructions on cone adapters, ensures permanent fixing of the supra construction on the cone adapter, as well as the bar and the screwed bridge construction, also with the SAE technique. ,
Gingiva sleeve PEEK, (for Multi Unit)
PEEK gingiva sleeve for the Multi Unit System, can be adjusted individually.
Fixation screw OT for Multi Unit,
This fixation screw is suited to be used with the forming aid Multi Unit. Due to the knurling at the screw head, this screw is safe and easy to use.
Scan abutment for Multi Unit,
This bowling pin shaped PEEK abutment is excellently suited for digital measuring with optical scanners or laser scanners. The Best Fit-function of the design software is precisely supported by an additional levelled surface.Preparing the scan abutment with scan spray is not necessary, as it is optimally scanned because of its dull whitish color.
Prosthetic screw secondary, (for Multi Unit Abutment)
This screw is used for the fixation of a restoration on Multi Unit Abutments.
Metal sleeve (for Multi Unit),
Titanium sleeve made from titanium grade 5 - for friction-free glue fixing on abutments of the Multi Unit System.
Plastic sleeve POM, for Multi Unit
Acrylic sleeve made of POM (polyoxymethylene) for the Multi Unit System, can be burned out.