Tizian Blank Wax 98 x 20 mm, Wax, Color: brown
Description
Using this CAD/CAM blank you can mill your wax models and frameworks for moulding. The blank is available in several colours and heights.
Product number:
220070
Questions about the product? We are glad to be here for you!
Product information "Tizian Blank Wax 98 x 20 mm, Wax, Color: brown"
Using this CAD/CAM blank you can mill your wax models and frameworks for moulding. The blank is available in several colours and heights. These blanks are characterised by very good fit of subsequent work.
Indications: Can be burned out as part of the casting technique when making provisional restorations.
| Form: | 98mm rund |
|---|---|
| Werkstoff: | Wachs |
Brochures and further information on this product
Cutsomers also bought
T61 Tizian Cut 5/3.5 radius cutter 3.0 mm for Titan/CoCr, 4-bladed, 6 mm shaft
T61 - metal roughing tool The complex geometry of the four high-capacity cutting edges (this is not a radius cutter!) facilitate a smooth operation, a much better service life and time savings of up to 50 % during the roughing procedure. Metal restorations are manufactured within ca. 10-15 min. in extraordinary quality. Please note that the special cutter geometry requires a new strategy and new tool data in the CAM software. This tool does not replace the reliable T6! Diameter Ø 3.0 mm Cutting edges quadruple edge Shaft Ø 6 mm Cutting length: l = 15 mm Total length: 45 mm Max. blank height: 15 mm Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian Cut 5.2 Series, Tizian Cut 5, CORiTEC 550i, CORiTEC 650i
T4/T9 Tizian 3.5 1,0 mm premium radius cutter for CoCr/Ti, T4/T9, for 6 mm chuck
Diamond radius cutter, double-edged, edge Ø 1 mm, shaft Ø 6 mm, max. blank height: 15 mm
T13/T40/T50Tizian Cut 5/3.5 Zirconia Drill diamond 2.5mm, 6 mm shaft
Diamond radius cutter, double-edged, edge Ø 2.5 mm, shaft Ø 6 mm, total length 53 mm Processing type: roughing Blank material: zirconium, nano-composite Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 650i
T14/T41/T51 Tizian Cut 5/3.5 Zirconia Drill diamond 1mm, 6 mm shaft
Diamond radius cutter, double-edged, edge Ø 1 mm, shaft Ø 6 mm, total length 53 mm, max. blank height: 25 mm Processing type: fine finishing Blank material: zirconium, nano-composite Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 650i
Tizian Blank NEM fine 98 mm
Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%
Tizian 3.5 2,0 mm premium radius cutter for CoCr/Ti, T2/T7, for 6 mm chuck
T2/T7, mill for pre-finishing, double-edged, edge Ø 2.0 mm, shaft Ø 6 mm, max. blank height = 25 mm. Finishing type: pre-finishing Blank material: CoCr, titanium Coating type: coated Ring color gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5.2 Pro, Tizian Cut 5.2 Pro plus, CORiTEC 550i, CORiTEC 650i