Tizian Blank PMMA Transparent Splint 2.0, 98 mm in bulk pack, 24 pc
Description
Used for the fabrication of temporary crowns and bridges to replace teeth or groups of teeth. Use in all open CAD-CAM systems
Product number:
224047
Questions about the product? We are glad to be here for you!
Product information "Tizian Blank PMMA Transparent Splint 2.0, 98 mm in bulk pack, 24 pc"
Used for the fabrication of temporary crowns and bridges to replace teeth or groups of teeth. Use in all open CAD-CAM systems
Your benefits:
- Very high material homogeneity due to the industrial polymerization process.
- Balanced combination of breaking strength and elasticity for clinical use. This guarantees excellent long-term stability.
- Excellent abrasion resistance.
- Ensures high process reliability, no mixing errors, no polymerization shrinkage and no unpleasant odour, as no hand mixing or cartridge.
- Extended milling properties thanks to economical production.
- Long-lasting color stability and aesthetics.
- Natural fluorescence.
Cutsomers also bought
Tizian Blank NEM fine 98 mm
Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%
Tizian Blank NEM fine 98 mm
Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%
T61 Tizian Cut 5/3.5 radius cutter 3.0 mm for Titan/CoCr, 4-bladed, 6 mm shaft
T61 - metal roughing tool The complex geometry of the four high-capacity cutting edges (this is not a radius cutter!) facilitate a smooth operation, a much better service life and time savings of up to 50 % during the roughing procedure. Metal restorations are manufactured within ca. 10-15 min. in extraordinary quality. Please note that the special cutter geometry requires a new strategy and new tool data in the CAM software. This tool does not replace the reliable T6! Diameter Ø 3.0 mm Cutting edges quadruple edge Shaft Ø 6 mm Cutting length: l = 15 mm Total length: 45 mm Max. blank height: 15 mm Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian Cut 5.2 Series, Tizian Cut 5, CORiTEC 550i, CORiTEC 750i
T11 Tizian Cut 5/3.5 PMMA finemilling single point mill, 2,5 mm, 6 mm shaft
Radius cutter single-edged, edge Ø 2.5 mm, shaft Ø 6 mm, total length 53 mm, max. blank height = 25 mm. Processing type: pilot milling Blank material: PMMA, PEEK Coating type: uncoated Ring color: gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
Tizian Blank PMMA Transparent Splint 2.0, 98 mm in bulk pack, 24 pc
Used for the fabrication of temporary crowns and bridges to replace teeth or groups of teeth. Use in all open CAD-CAM systems Your benefits: Very high material homogeneity due to the industrial polymerization process. Balanced combination of breaking strength and elasticity for clinical use. This guarantees excellent long-term stability. Excellent abrasion resistance. Ensures high process reliability, no mixing errors, no polymerization shrinkage and no unpleasant odour, as no hand mixing or cartridge. Extended milling properties thanks to economical production. Long-lasting color stability and aesthetics. Natural fluorescence.