Non precious alloy cutter (201402),
Product number:
681137
Questions about the product? We are glad to be here for you!
Product information "Non precious alloy cutter (201402),"
Brochures and further information on this product
Cutsomers also bought
T1/T6 Radius cutter 3.0 mm for CoCr/Titanium, for Tizian Cut 5/1.5 for 3mm collet chuck
Radius cutter short, double edge, cutting edge Ø 3 mm, shaft Ø 3 mmTotal length 45 mm. Max. blank height = 15 mm Processing type: rough pre-machining Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian 1.5 Pro, Tizian 2.5 Loader Pro, Tizian Cut 5
T2/T7 - Radius cutter 2.0 mm for CoCr/Titanium, for Tizian Cut 5/1.5 for 3mm collet chuck
Radius cutter short, double edge, cutting edge Ø 2 mm, shaft Ø 3 mmTotal length 45 mm. Max. blank height = 15 mm Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian 1.5 Pro, Tizian 2.5 Loader Pro, Tizian Cut 5
T4/T79 - Radius cutter 1.0 mm for CoCr/Titanium, for Tizian Cut 5/1.5 for 3mm collet chuck
-Radius cutter short, double edge, cutting edge Ø 1 mm, shaft Ø 3 mmTotal length 45 mm. Max. blank height = 15 mm Processing type: fine finishing Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian 1.5 Pro, Tizian 2.5 Loader Pro, Tizian Cut 5
T12 Tizian Cut 5/Tizian 1.5/ 2.5/ 3.5 PMMA finemilling single point mill, 1,0mm, 3mm shaft
Radius cutter single-edged, edge Ø 1 mm, shaft Ø 3 mm, total length 48 mm, max. blank height = 25 mm. Processing type: fine finishing Blank material: PMMA, PEEK Coating type: uncoated Ring color: gold For milling machines: Tizian Cut 5 without metal option (3 mm shaft)
Tizian Blank MT + 98 mm
"with graduated light transmission translucence of 49 % to 45 % Special features:Following the trend, a blank that combines the positive properties of the already established zirconium oxide qualities 4Y-TZP and the highly translucent 5Y-TZP in the enamel and in the body. Suitable for: highly esthetic monolithic, fully anatomic crowns, partial crowns and bridges with up to 14 units, inlays, onlays, veneers and abutments. Due to its high esthetics, it is particularly suitable for the anterior and visible tooth area. All processing techniques are possible: Staining, cut-back and veneering techniques are possible. The combination of 4Y (Extra Translucent with high strength) and 5Y (High Translucent with high translucency) results in improvements in the esthetic effect and safety for an unrestricted indication range of restorations. In addition to a smooth transition between the layers within the blank or restoration, we were able to achieve improved esthetics in relation to the Vita Classical Shade Guide. Graduated strength The smooth transition between the layers results in a graduated strength within the blank or restoration. This makes Tizian Blank MT + suitable for almost all indications. Material Zirconium dioxide type II, class 5 according to DIN EN ISO 6872 Flexural strength: typical mean value ? 1,100 MPa Translucence graduation of <
T11 Tizian Cut 5/Tizian 1.5/ 2.5/ 3.5 PMMA finemilling single point mill, 2,5mm, 3mm shaft
Radius cutter single-edged, edge Ø 2.5 mm, shaft Ø 3 mm, total length 48 mm, max. blank height = 25 mm. Processing type: pilot milling Blank material: PMMA, PEEK Coating type: uncoated Ring color: gold For these milling machines: Tizian Cut 5 without metal option (3 mm shaft)