FuturaGen Com4 liquid
Product number:
750961
Questions about the product? We are glad to be here for you!
Product information "FuturaGen Com4 liquid"
The longer flow phase of this self-curing polymer is ideal for enhancing frameworks.
Acrylic fluid for your FuturaGen Com4 acrylic.
The acrylic for completing your frameworks. The processing time of up to 5-6 minutes also makes it suitable for the hot summer months.
Benefits:
- Excellent physical properties
- High color stability
- Low shrinkage
- Easy to use
Indication
- Partial and full dentures in the flow technique
- Completing frameworks
- Denture relinings
- Repairs and extensions
- Splints
- Injection process
Brochures and further information on this product
Cutsomers also bought
FuturaGen Com4 powder, cold-curing acrylic
The right denture acrylic - if good just isn't good enough for you. FuturaGen Com4 is a cold-curing polymer which sets new standards with ist outstandig physical properties. Your benefits: Extensive range of colors Minimal residual monomer content Very high stability, making it also suitable for occlusal splints Extremely flat surface, reduces plaque accumulation Great for individualization, for example with FuturaIntensive colors paints and separate veins Very good fit due to low shrinkage: Also extremely well suited for implant-supported restorations
FuturaJet, pink-k, 1000 g
FuturaJet is the multi-talent in the acrylics world. It is eminently suitable for the injection method and all conventional acrylics techniques. Your benefits: Wide choice of colors Easy to use Universally applicable Excellent mechanical properties Extraordinary fit Polymerization: Flask temperature 35 °C (95 °F), injection pressure 30 min. Polymerization time: 15 min. at 2-4 bar, water temperature 45 °C (113 °F). Mixing ratio powder:liquid (weight [g]): 2:1 (free dosage) Processing time: 4.5 min. Physical properties: Vickers hardness: ca. 140 MPa Flexural strength: ca. 95 MPa E-module: ca. 2,700 MPa Water absorption: 23.3 µg/mm³ Water solubility: 1.1 µg/mm³ Residual monomer: complies with the standard 12 kg containers upon request.FuturaJet liquid is available in 0.5 l or 1 l containers.
FuturaJet liquid, 1000 ml,
Monomer liquid for your FuturaJet acrylic. FuturaJet is the multi-talent in the acrylics world. It is eminently suitable for the injection method and all conventional acrylics techniques. Your benefits: Wide choice of colors Easy to use Universally applicable Excellent mechanical properties Extraordinary fit Polymerization: Flask temperature 35 °C (95 °F), injection pressure 30 min. Polymerization time: 15 min. at 2-4 bar, water temperature 45 °C (113 °F). Mixing ratio powder:liquid (weight [g]): 2:1 (free dosage) Processing time: 4.5 min. Physical properties: Vickers hardness: ca. 140 MPa Flexural strength: ca. 95 MPa E-module: ca. 2,700 MPa Water absorption: 23.3 µg/mm³ Water solubility: 1.1 µg/mm³ Residual monomer: complies with the standard Availability of FuturaJet powder: 500 g or 1 kg container.
FuturaGen Com4 powder, cold-curing acrylic
The right denture acrylic - if good just isn't good enough for you. FuturaGen Com4 is a cold-curing polymer which sets new standards with ist outstandig physical properties. Your benefits: Extensive range of colors Minimal residual monomer content Very high stability, making it also suitable for occlusal splints Extremely flat surface, reduces plaque accumulation Great for individualization, for example with FuturaIntensive colors paints and separate veins Very good fit due to low shrinkage: Also extremely well suited for implant-supported restorations